All Printers

VORON 0.2

direct driveEnclosedAuto-LevelKlipper

Specifications

Build Volume
120x120x120mm
Bed Type
Textured PEI
Max Nozzle Temp
300°C
Max Bed Temp
120°C
Cooling
high
Max Speed
250 mm/s
Max Acceleration
5000 mm/s²
Nozzle Sizes
0.4mm · 0.6mm · 0.8mm

Known Issues

warning

Heat Creep

The printer may experience heat creep causing filament jams.

Mitigation: Ensure sufficient cooling around the heat break and use an appropriate filament.

info

Belt Tension

Incorrect belt tension can lead to print artifacts.

Mitigation: Regularly check and adjust belt tension to maintain optimal performance.

Filament Compatibility

PLAexcellentPrints well with minimal adjustments.
PETGexcellentRequires slight increase in temperature for optimal adhesion.
ABSgoodRequires enclosure and proper ventilation for best results.
ASAgoodSimilar to ABS, enclosure needed for strength and dimensional accuracy.
TPUgoodDirect drive setup handles flexible filaments well, slow down the printing speed.
NylonfairNeeds precise temperature control and enclosure for best results.
PCfairHigh temperature materials can be difficult; use with enclosure and bed adhesion aids.

Maintenance Tips

Regularly lubricate linear rails and bearings.
Check and tighten screws and fasteners periodically.
Clean the printer's build surface to ensure optimal adhesion.

Popular Upgrades

Upgraded hotend for higher temperature performance.
Improved part cooling fan for better surface finish.
Linear rail on Z-axis for reduced wobble.

Best For

PrototypingSmall to medium-sized parts

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Voron 0.2 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer