SOVOL SV08 MAX
Direct DriveAuto-LevelKlipper
Specifications
| Build Volume | 500x500x500mm |
|---|---|
| Bed Type | PEI Spring Steel |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Hotend Type | All-Metal |
| Cooling | High-Flow Part Cooling Fans |
| Max Speed | 700 mm/s |
| Max Acceleration | 40000 mm/s² |
| Motion System | corexy |
| Firmware | Klipper |
| Nozzle Sizes | 0.4mm · 0.6mm · 0.8mm |
Known Issues
warning
Layer Shifting at High Speeds
Layer shifts can occur during high-speed printing, leading to misaligned layers.
Mitigation: Reduce print speed and acceleration settings; ensure belts are properly tensioned and aligned.
See the full fix guide → warning
Extruder Clogs During Large Prints
The extruder may clog during extended or large prints, causing print failures.
Mitigation: Regularly clean the extruder; ensure filament is dry and free from debris; monitor filament feeding system for issues.
See the full fix guide → info
Vibrations from Cooling Fans
High-speed cooling fans can introduce vibrations, affecting print quality.
Mitigation: Inspect and secure fan mounts; consider replacing fans if vibrations persist.
Filament Compatibility
Maintenance Tips
Regularly clean the nozzle and extruder to prevent clogs.
Check and tighten belts to maintain proper tension.
Keep the build plate clean to ensure good adhesion.
Popular Upgrades
Enclosure kit for improved temperature stability.Amazon →
Upgraded cooling fans to reduce vibrations.
High-flow nozzle for faster printing speeds.
Best For
Large-scale prototypingIndustrial parts manufacturingOversized props and models
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for the Sovol SV08 Max - calibrated for your filament and slicer in seconds.
Generate Settings for This Printer