SOVOL SV07 PLUS

bowden longAuto-LevelKlipper

Specifications

warning

The auto-leveling feature can sometimes provide inaccurate results, leading to first layer adhesion issues.

Mitigation: Manually level the bed or fine-tune the auto-leveling mesh in firmware settings.

PLAexcellentHandles PLA well with minimal adjustments required.

PETGgoodRequires an enclosed build area for optimal prints.

ABSfairDifficult due to lack of enclosure; warping can occur.

ASAfairSimilar issues as ABS, needs careful environmental management.

TPUexcellentDirect drive is well suited for flexible materials.

NylonpoorHigh temperatures and moisture sensitivity make printing challenging.

PCpoorHigh bed and chamber temperatures required, which this printer lacks.

Regularly clean the nozzle to prevent clogs.

Ensure the build plate is level to avoid print failures.

Lubricate axes with appropriate grease to maintain smooth motion.

Dual Z-axis upgrade for improved stability.

Enclosure kit for printing ABS and ASA materials.Amazon →

All-metal hotend for higher temperature performance.

Hobbyist useFlexible material printing

FixMyPrint generates exact slicer settings for the Sovol SV07 Plus - calibrated for your filament and slicer in seconds.