All Printers

SOVOL SV06 PLUS

direct driveAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Sovol SV06 Plus technical specifications
Build Volume300x300x340mm
Bed TypeTextured PEI
Max Nozzle Temp300°C
Max Bed Temp110°C
Hotend Typeall_metal
Coolingstandard
Max Speed150 mm/s
Max Acceleration3000 mm/s²
Motion Systemi3
FirmwareMarlin
Nozzle Sizes0.4mm · 0.6mm · 0.8mm

Known Issues

info

Belt Tension

Belts may need frequent tension adjustments for optimal performance.

Mitigation: Regularly check and adjust belt tension using the provided tensioners.

Filament Compatibility

PLAexcellentStable performance with standard settings.
PETGgoodMay require tuning retraction settings to avoid stringing.
ABSfairLack of enclosure affects print quality and adhesion.
ASAfairSimilar challenges as ABS regarding warping.
TPUgoodDirect drive system handles flexible filaments well.
NylongoodHigh nozzle temp is beneficial, but bed adhesion must be addressed.
PCpoorHigh warping potential without an enclosure.

Maintenance Tips

Regularly lubricate the Z-axis lead screws.
Check nozzle for blockages every few prints.
Keep bed surface clean for better adhesion.

Popular Upgrades

Upgraded stepper motor drivers for quieter operation.
Enclosure for improved material printability.Amazon →
Auto bed leveling sensor for enhanced calibration.

Best For

Prototyping with PLA and PETGFlexible material projectsHobbyist and educational use

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Sovol SV06 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer