All Printers

SOVOL SV06 ACE

direct driveAuto-LevelMarlin

Specifications

Build Volume
220x220x250mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed Adhesion

Initial layers might not adhere well to the bed.

Mitigation: Ensure the bed is properly leveled and the surface is clean before printing.

info

Firmware Updates

Firmware might need periodic updates for optimal performance.

Mitigation: Check the Sovol website regularly for firmware updates and follow instructions for installation.

Filament Compatibility

PLAexcellentWorks well with default settings and minimal adjustments.
PETGgoodRequires slightly higher temperatures and slower speeds.
ABSfairMay require an enclosure to prevent warping.
ASAfairSimilar requirements as ABS, enclosures recommended.
TPUgoodDirect drive extruder handles flexible filaments well.
NylonfairHigher temperatures needed and controlled environment recommended.
PCpoorNot ideal without an enclosure and high-temperature control.

Maintenance Tips

Regularly clean the nozzle to prevent clogs.
Inspect belts for tightness and wear periodically.
Lubricate the Z-axis lead screws for smooth movement.

Popular Upgrades

All-metal hotend for higher temperature printing.
Upgraded stepper motor drivers for quieter operation.
Flexible build plates for easier part removal.

Best For

Home hobbyistsPrototyping small parts

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Sovol SV06 ACE - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer