All Printers

SOVOL SV01

direct driveMarlin

Specifications

Build Volume
280x240x300mm
Bed Type
Glass
Max Nozzle Temp
250°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

info

Manual Bed Leveling

The printer requires manual bed leveling which can be time-consuming.

Mitigation: Use a leveling sensor or follow precise leveling procedures.

Filament Compatibility

PLAexcellentWorks very well with proper cooling settings.
PETGgoodMay require tuning of retraction settings to avoid stringing.
ABSfairLack of enclosure can lead to warping issues.
ASAfairSimilar to ABS, challenges with warping without an enclosure.
TPUexcellentDirect drive extruder handles flexible filament well.
NylonfairHigh temperatures can be hard to maintain without an enclosure.
PCpoorDifficult to print without an enclosure and consistent heat.

Maintenance Tips

Regularly check and tighten frame screws to maintain structural integrity.
Clean the nozzle to prevent clogs and ensure smooth extrusion.
Lubricate the Z-axis screw and linear rods for smoother motion.

Popular Upgrades

Add an auto-bed leveling sensor.
Upgrade to a dual-gear extruder for more consistent extrusion.
Install a PEI spring steel sheet for improved bed adhesion.

Best For

prototypinghobbyist projectseducation

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Sovol SV01 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer