SNAPMAKER A350
Direct DriveEnclosedAuto-LevelProprietary
Specifications
| Build Volume | 320x350x330mm |
|---|---|
| Bed Type | Glass |
| Max Nozzle Temp | 275°C |
| Max Bed Temp | 80°C |
| Hotend Type | All-Metal |
| Cooling | Single Part Cooling Fan |
| Max Speed | 100 mm/s |
| Max Acceleration | N/A |
| Motion System | bedslinger |
| Firmware | Proprietary |
| Nozzle Sizes | 0.4mm |
The FixMyPrint specifications database identifies the Snapmaker A350's stock firmware as proprietary rather than Klipper. See the pressure advance calibration guide for Klipper, Marlin, and Bambu-specific tuning steps.
Known Issues
warning
Bed Adhesion
Some users experience issues with bed adhesion, particularly with larger prints. The lower 80°C bed max (vs A250's 100°C) is a power supply limitation of the larger bed.
Mitigation: Use a brim or raft, and ensure the bed is properly leveled and clean before printing. High-warp materials like ABS/ASA may struggle with the 80°C ceiling.
See the full fix guide →Filament Compatibility
Maintenance Tips
Regularly clean the print bed and nozzle to ensure optimal performance.
Check and tighten screws and belts periodically to prevent mechanical issues.
Apply proper lubrication to moving parts to maintain smooth operation.
Popular Upgrades
Best For
multi-functionality due to modular designlarger prints requiring bigger build volume
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for the Snapmaker A350 - calibrated for your filament and slicer in seconds.
Generate Settings for This Printer