All Printers

SNAPMAKER 2.0

direct driveEnclosedAuto-LevelMarlin

Specifications

Build Volume
230x250x235mm
Bed Type
Glass
Max Nozzle Temp
275°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
100 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed Adhesion

Some users experience issues with bed adhesion, particularly with larger prints.

Mitigation: Use a brim or raft, and ensure the bed is properly leveled and clean before printing.

Filament Compatibility

PLAexcellentStandard filament type for this printer.
PETGgoodRequires careful bed preparation for best results.
ABSgoodEnclosure helps with temperature control but may still experience warping.
ASAfairSimilar to ABS with possible warping issues.
TPUgoodDirect drive extruder helps with flexible filaments.
NylonfairMoisture sensitive; requires proper filament storage.
PCpoorGenerally not recommended due to high temperatures required.

Maintenance Tips

Regularly clean the print bed and nozzle to ensure optimal performance.
Check and tighten screws and belts periodically to prevent mechanical issues.
Apply proper lubrication to moving parts to maintain smooth operation.

Popular Upgrades

Dual extruder module
Enclosure air filtration system
CNC machining or laser engraving head

Best For

multi-functionality due to modular designbeginners looking for an all-in-one machine

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Snapmaker 2.0 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer