QIDI Q2

Direct DriveEnclosedAuto-LevelKlipper

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Qidi Q2 technical specifications
Build Volume	270x270x256mm
Bed Type	PEI Spring Steel
Max Nozzle Temp	370°C
Max Bed Temp	120°C
Hotend Type	All-Metal
Cooling	Part Cooling Fan + Chamber Fan + Air Filtration
Max Speed	100 mm/s
Max Acceleration	N/A
Motion System	enclosed_corexy
Firmware	Klipper
Nozzle Sizes	0.4mm

info

Some users report adhesion issues with large prints.

Mitigation: Use a glue stick or hair spray on the glass bed to improve adhesion.

PLAexcellentWorks well with minimal adjustments.

PETGgoodRequires slower speeds to avoid stringing.

ABSfairBetter results with enclosed chamber.

ASApoorNot recommended due to high shrinkage.

TPUfairMay need slower speeds due to flexibility.

NylonpoorHigh temperatures and enclosure recommended.

PCpoorChallenging due to high temperature requirements.

Regularly clean the nozzle to prevent clogs.

Check and tighten belts periodically to ensure optimal print quality.

Lubricate the Z-axis screw to maintain smooth operation.

Flexible build plate for easy part removal

All-metal hotend for higher temperature printing

Upgrade cooling fan for better precision

small functional partseducational purposes

FixMyPrint generates exact slicer settings for the Qidi Q2 - calibrated for your filament and slicer in seconds.