All Printers

QIDI Q1 PRO

Direct DriveEnclosedAuto-LevelKlipper
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Qidi Q1 Pro technical specifications
Build Volume245x245x240
Bed TypePEI Spring Steel
Max Nozzle Temp350°C
Max Bed Temp120°C
Hotend TypeAll-Metal
CoolingPart Cooling Fan + Chamber Fan
Max Speed150 mm/s
Max Acceleration1800 mm/s²
Motion Systemenclosed_corexy
FirmwareKlipper
Nozzle Sizes0.4mm

Known Issues

warning

Inconsistent First Layer Adhesion

Some users have reported issues with bed adhesion for the first layer.

Mitigation: Adjust first layer height and ensure a clean bed surface before printing.

See the full fix guide →

Filament Compatibility

PLAexcellentHandles PLA very well with smooth results.
PETGgoodRequires fine-tuning for optimal results.
ABSgoodBetter results with an enclosure to minimize warping.
ASAfairCan print ASA, but enclosure is recommended.
TPUgoodDirect drive setup allows decent TPU performance.
NylonfairChallenging without an enclosure and high temps.
PCpoorNot ideal due to limited temperature range.

Maintenance Tips

Regularly clean and lubricate the Z-axis lead screw.
Check for clogged nozzles and perform regular maintenance.
Calibrate the bed every few prints to ensure consistency.

Popular Upgrades

All-metal hotend for higher temperature filaments.
Improved part cooling fan for better overhangs.
Flexible build plate for easier print removal.

Best For

Prototyping small partsHobbyist projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Qidi Q1 Pro - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer