All Printers

PRUSA MK3S+

direct driveAuto-LevelPrusa-Firmware

Specifications

Build Volume
250x210x210mm
Bed Type
Textured PEI
Max Nozzle Temp
300°C
Max Bed Temp
120°C
Cooling
standard
Max Speed
200 mm/s
Max Acceleration
1000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

info

Filament Sensor Sensitivity

The filament sensor may occasionally trigger false positives.

Mitigation: Calibrate the sensor sensitivity settings in firmware or disable if not needed.

warning

Z-Axis Misalignment

The Z-axis may become misaligned if the printer is moved roughly.

Mitigation: Realign the Z-axis using the printer's auto-leveling feature.

Filament Compatibility

PLAexcellentPrints with ease, great for beginners.
PETGexcellentRecommended for strong and durable prints.
ABSgoodNeeds an enclosure to prevent warping.
ASAgoodSimilar to ABS, but with better UV stability.
TPUexcellentDirect drive is well-suited for flexible filaments.
NylonfairRequires specific settings and a dry environment.
PCfairNeeds high temperature and controlled environment.

Maintenance Tips

Regularly check and clean the nozzle to prevent clogs.
Lubricate the rods and bearings every few months.
Update firmware periodically for optimal performance.

Popular Upgrades

MMU2S (Multi Material Upgrade)
Noctua fan upgrade for quieter operation
Bear Upgrade for enhanced stability and performance

Best For

PrototypingHobbyists and Makers

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Prusa MK3S+ - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer