PRUSA MK3

Direct DriveAuto-LevelPrusa-Firmware

Specifications

info

Occasional nozzle clogs can occur with PLA and other materials.

Mitigation: Regularly clean the nozzle and use quality filament.

warning

There is a risk of thermal runaway if the thermistor becomes loose.

Mitigation: Ensure the thermistor is securely mounted and monitor for errors.

PLAexcellentEasy to print and good adhesion with PEI sheet.

PETGexcellentGreat for stronger parts; good adhesion.

ABSgoodRequires a warm environment; potential warping.

ASAgoodSimilar to ABS, slightly less warping.

TPUexcellentDirect drive handles flexible materials well.

NylonfairRequires high temp; watch for moisture.

PCfairNeeds very high temps; ensure adequate ventilation.

Regularly clean and lubricate moving parts.

Calibrate the bed level after every significant move or transport.

Perform a visual check of all cables and connections monthly.

Bondtech extruder upgrade

Silent fan replacement

OctoPrint server for remote monitoring

prototypingeducational purposeshobbyist printing

FixMyPrint generates exact slicer settings for the Prusa MK3 - calibrated for your filament and slicer in seconds.