All Printers

PRUSA MK2S

direct driveAuto-LevelPrusa-Firmware

Specifications

Build Volume
250x210x200mm
Bed Type
Smooth PEI
Max Nozzle Temp
300°C
Max Bed Temp
120°C
Cooling
standard
Max Speed
200 mm/s
Max Acceleration
1000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

warning

Pinda probe adjustment

The Pinda probe may require manual adjustments from time to time to maintain proper leveling.

Mitigation: Regularly check and adjust the Pinda probe height before starting a print.

Filament Compatibility

PLAexcellentPerfectly suited for PLA with minimal adjustments needed.
PETGexcellentHandles PETG well with the smooth PEI sheet.
ABSgoodCareful temperature control is needed to prevent warping.
ASAgoodSimilar handling to ABS, requires temperature stability.
TPUgoodDirect drive extruder allows flexible filament printing with minimal tuning.
NylonfairRequires high temperature and can struggle without an enclosure.
PCfairCan be challenging due to high temperature requirements and warping issues.

Maintenance Tips

Regularly clean the smooth PEI sheet with isopropyl alcohol.
Ensure the Pinda probe is properly adjusted to maintain accurate first layers.
Lubricate the bearings and rods periodically for smooth operation.

Popular Upgrades

Bondtech extruder gears for improved filament grip.
Noctua fan for quieter operation.
Filament sensor upgrade to handle more filament types.

Best For

PrototypingHobbyist printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Prusa MK2S - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer