All Printers

PRUSA MINI+

bowden shortAuto-LevelBuddy
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Prusa Mini+ technical specifications
Build Volume180x180x180mm
Bed TypeTextured PEI
Max Nozzle Temp280°C
Max Bed Temp100°C
Hotend Typeall_metal
Coolingstandard
Max Speed200 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareBuddy
Nozzle Sizes0.4mm

Known Issues

warning

Z-Axis Wobble

Under certain conditions, the Z-axis may exhibit wobbling leading to surface artifacts.

Mitigation: Ensure all screws are tightened properly and check the Z motor alignment.

Filament Compatibility

PLAexcellentOptimal printing with standard settings.
PETGexcellentUse slightly higher temperatures for better adhesion.
ABSgoodRequires enclosure to prevent warping.
ASAgoodSimilar to ABS; may need an enclosure.
TPUgoodDirect drive allows flexible filament handling.
NylonfairHigher extrusion temperatures required.
PCfairMay require a high-temperature setup and enclosure.

Maintenance Tips

Regularly clean the PEI sheet with isopropyl alcohol.
Ensure the nozzle is clear of obstructions before each print.
Lubricate the Z-axis lead screw monthly to ensure smooth movement.

Popular Upgrades

Hardened steel nozzle for abrasive materialsAmazon →
Improved cooling fan shroud
Filament sensor upgrade

Best For

PrototypingHobby projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Prusa Mini+ - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer