All Printers

PRUSA MINI

bowdenAuto-LevelBuddy

Specifications

Build Volume
180x180x180mm
Bed Type
Textured PEI
Max Nozzle Temp
280°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
200 mm/s
Max Acceleration
1250 mm/s²
Nozzle Sizes
0.25mm · 0.4mm · 0.6mm

Known Issues

warning

Thermal Runaway

Printer may exhibit thermal runaway issues if connections are loose.

Mitigation: Ensure all connectors are securely attached and firmware is up to date.

info

Noisy Operation

Stepper motors can be noisy during operation.

Mitigation: Consider rubber dampers or soundproofing for quieter operation.

Filament Compatibility

PLAexcellentOffers great results with default settings.
PETGgoodNeeds tuning for best quality.
ABSfairRequires an enclosure to avoid warping.
ASAfairSimilar requirements as ABS, enclosure recommended.
TPUgoodPrints well with slower speeds.
NylonpoorNot recommended due to lack of enclosure.
PCpoorPrinting without an enclosure is challenging.

Maintenance Tips

Regularly check for loose screws, especially on the frame.
Clean and lubricate rods to prevent binding.
Update firmware to the latest version for better performance.

Popular Upgrades

Textured sheet for better adhesion.
Filament sensor for detecting runouts.
Nozzle upgrade kit for varied filament types.

Best For

hobbyistsbeginnerseducational purposes

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Prusa Mini - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer