All Printers

FLYING BEAR GHOST 5

Direct DriveAuto-LevelKlipper-based

Specifications

Flying Bear Ghost 5 technical specifications
Build Volume255x210x200
Bed TypePEI Spring Steel
Max Nozzle Temp300°C
Max Bed Temp110°C
Hotend TypeAll-Metal
CoolingDual Part Cooling Fans
Max Speed150 mm/s
Max AccelerationN/A
Motion Systemcorexy
FirmwareKlipper-based
Nozzle Sizes0.4mm · 0.6mm · 0.8mm

Known Issues

warning

Bed adhesion challenges

Users report issues with bed adhesion when printing with certain filaments.

Mitigation: Using an adhesive like glue stick or hairspray can improve adhesion.

See the full fix guide →
info

Extruder clogging

The extruder may clog occasionally with flexible filaments.

Mitigation: Ensuring the filament is clean and using a consistent temperature can reduce the risk.

See the full fix guide →

Filament Compatibility

PLAexcellentPrints well with default settings.
PETGgoodMay need adjustments for optimal results.
ABSfairRequires enclosure for best results.
ASAfairSimilar to ABS, benefits from enclosure.
TPUgoodDirect drive works well, but print slowly.
NylonpoorDifficult to print without enclosure.
PCpoorHigh temperatures needed, not ideal without enclosure.

Maintenance Tips

Regularly clean the bed surface to ensure good adhesion.
Lubricate the Z-axis lead screw to maintain smooth operation.
Check belts for proper tension and wear periodically.

Popular Upgrades

Adding a PEI sheet for better bed adhesion.Amazon →
Installing dampers to reduce noise.
Upgrading to a dual-drive extruder for better flexible filament performance.

Best For

prototypinghobby printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Flying Bear Ghost 5 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer