All Printers

FLSUN SR

bowdenAuto-LevelMarlin

Specifications

Build Volume
260x260x330mm
Bed Type
Glass
Max Nozzle Temp
265°C
Max Bed Temp
100°C
Cooling
high
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Auto-leveling accuracy

Auto-leveling may occasionally require manual adjustment for optimal results.

Mitigation: Perform manual leveling checks regularly to ensure the first layer adhesion.

Filament Compatibility

PLAexcellentPLA prints reliably, recommended for best results.
PETGgoodPETG requires careful bed adhesion management.
ABSfairBetter results with an enclosure due to warp issues.
ASAfairSimilar to ABS, benefits from enclosure.
TPUgoodFlexible filament can work with reduced speed.
NylonfairRequires precise temperature control and good bed adhesion.
PCpoorHigher temperatures needed than bowden setup typically supports.

Maintenance Tips

Regularly clean the nozzle to prevent clogs.
Check and tighten all frame screws to avoid print shifting.
Lubricate the rails and lead screws for smooth movement.

Popular Upgrades

Direct drive extruder conversion
PEI spring steel sheet for the bed
Improved cooling fan duct

Best For

Prototyping and small-scale productionEducational purposes and hobby projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Flsun SR - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer