All Printers

ELEGOO NEPTUNE 4 PRO

direct driveAuto-LevelMarlin

Specifications

Build Volume
225x225x265mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
3000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

info

Initial Bed Adhesion

Some users report difficulty in achieving the first layer adhesion on the textured PEI bed.

Mitigation: Ensure proper bed leveling and adjust the Z-offset if necessary. Cleaning the bed with isopropyl alcohol can also help.

Filament Compatibility

PLAexcellentWorks great with minimal adjustments.
PETGgoodRequires tuning of retraction settings.
ABSfairOpen frame may cause warping issues.
ASAfairSimilar challenges as ABS with warping.
TPUgoodSlow down print speeds for better results.
NylonpoorNot ideal without an enclosure due to warping.
PCpoorHigh temperatures and enclosure needed for success.

Maintenance Tips

Regularly clean the PEI bed with isopropyl alcohol.
Check and tighten all screws before starting large prints.
Keep the direct drive extruder free of filament debris.

Popular Upgrades

BLTouch or similar for enhanced auto-leveling.
Upgraded cooling fans for better layer cooling.
All-metal hotend for higher temperature materials.

Best For

Educational purposesHobbyist projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Elegoo Neptune 4 Pro - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer