All Printers

ELEGOO NEPTUNE 4 PLUS

direct driveAuto-LevelMarlin

Specifications

Build Volume
320x320x400mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
3000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

info

Z-axis misalignment

Occasional issues with Z-axis alignment during assembly.

Mitigation: Ensure the Z-axis is properly aligned and the frame is squared during setup.

Filament Compatibility

PLAexcellentWorks reliably with standard settings.
PETGgoodMay require tuning for optimal adhesion.
ABSfairBenefits from an enclosure to manage warping.
ASAfairSimilar requirements as ABS for best results.
TPUgoodDirect drive supports flexible filaments well.
NylonfairHigher temperatures and enclosure recommended.
PCpoorNot recommended without significant modifications.

Maintenance Tips

Regularly check and tighten all screws and belts.
Clean the nozzle and bed surface to ensure quality prints.
Calibrate the extruder feed rate periodically.

Popular Upgrades

Upgraded cooling fan duct for better overhangs.
Stronger stepper motor drivers for quieter operation.
Linear rail kit for smoother movement.

Best For

PrototypingLarge-scale hobby projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Elegoo Neptune 4 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer