All Printers

ELEGOO CENTAURI CARBON

direct driveEnclosedAuto-LevelElegoo's custom firmware

Specifications

Build Volume
256x256x256mm
Bed Type
Dual-sided flexible plate with textured PEI on one side and a PLA-specific cool print adhesion coating on the other
Max Nozzle Temp
320°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
500 mm/s
Max Acceleration
20000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

warning

Heat Break Fan Failure

Users have reported failures of the heat break fan, leading to overheating and print quality issues.

Mitigation: Regularly inspect the heat break fan for proper operation and replace it if signs of failure are observed.

info

Multicolor Functionality Not Available

The initially promised multicolor functionality has not been implemented due to performance issues.

Mitigation: Elegoo offers compensation options, including a filament coupon, warranty extension, or a discount toward the upcoming Centauri Carbon 2 Combo.

Filament Compatibility

PLAexcellentOptimal performance with default settings.
PETGgoodRequires slight adjustments to temperature settings.
ABSgoodEnclosure helps maintain temperature stability.
ASAgoodSimilar to ABS; enclosure aids in reducing warping.
TPUfairDirect drive extruder supports TPU, but careful feeding is necessary.
NylonfairHigh nozzle temperature supports Nylon, but lack of active chamber heating may affect results.
PCpoorDespite high nozzle temperature, absence of active chamber heating may lead to warping.

Maintenance Tips

Regularly inspect and clean the heat break fan to prevent overheating.
Ensure the bed leveling system is calibrated before each print for optimal adhesion.
Keep the enclosure's air filter clean to maintain a safe printing environment.

Popular Upgrades

Installation of a higher-quality heat break fan for improved cooling.
Addition of an external chamber heater to enhance performance with temperature-sensitive materials.

Best For

High-speed prototypingPrinting with common filaments like PLA, PETG, and ABS

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Elegoo Centauri Carbon - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer