CREALITY K2 PLUS
Direct DriveEnclosedAuto-LevelKlipper
Buy on Amazon →Affiliate link - helps support FixMyPrint
Specifications
| Build Volume | 350x350x350 |
|---|---|
| Bed Type | PEI Spring Steel |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Hotend Type | All-Metal |
| Cooling | Part Cooling Fan + Auxiliary Fan + Chamber Fan |
| Max Speed | 600 mm/s |
| Max Acceleration | 30000 mm/s² |
| Motion System | enclosed_corexy |
| Firmware | Klipper |
| Nozzle Sizes | 0.4mm |
Known Issues
warning
Filament Jamming with Non-Creality Spools
Users have reported filament jams when using non-Creality filament spools, particularly those with cardboard spools that don't glide as smoothly.
Mitigation: Adjust the tension of the filament feeding mechanism, such as modifying the spring tension, to accommodate different spool types.
info
First Layer Adhesion Problems
Some users have experienced issues with the first layer not adhering properly, leading to failed prints.
Mitigation: Ensure the build plate is clean and properly leveled. Using appropriate bed adhesives or adjusting the initial layer settings may help improve adhesion.
See the full fix guide →Filament Compatibility
Maintenance Tips
Regularly clean the build plate to ensure proper adhesion.
Check and adjust belt tensions periodically to maintain print accuracy.
Lubricate linear rails and rods to ensure smooth movement.
Popular Upgrades
Best For
Large-scale multi-color printsFunctional prototypes requiring high-speed printing
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for the Creality K2 Plus - calibrated for your filament and slicer in seconds.
Generate Settings for This Printer