CREALITY K2

Direct DriveEnclosedAuto-LevelKlipper

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality K2 technical specifications
Build Volume	350x350x350
Bed Type	PEI Spring Steel
Max Nozzle Temp	350°C
Max Bed Temp	120°C
Hotend Type	All-Metal
Cooling	Part Cooling Fan + Auxiliary Fan + Chamber Fan
Max Speed	600 mm/s
Max Acceleration	20000 mm/s²
Motion System	enclosed_corexy
Firmware	Klipper
Nozzle Sizes	0.4mm

warning

Some units have been reported to arrive with a warped (taco-shaped) heat bed, making them unusable out of the box.

Mitigation: Contact Creality support for a replacement. Be aware that shipping replacement parts from China may take over 20 days.

info

Users have reported issues with the extruder clicking, skipping, or experiencing filament jams.

Mitigation: Ensure the nozzle is at the correct temperature, check for filament tangles on the spool, and verify that the spool turns freely.

PLAexcellentStandard material; prints well with default settings.

PETGexcellentRequires slightly higher temperatures; good adhesion.

ABSgoodEnclosure helps with temperature control; may require ventilation.

ASAgoodSimilar to ABS; better UV resistance.

TPUfairFlexible filament; may require reduced print speeds.

NylonfairRequires high temperatures and dry storage.

PCpoorHigh-temperature material; may exceed printer's capabilities.

Regularly clean the PEI bed surface to ensure proper adhesion.

Lubricate the guide rails periodically to maintain smooth movement.

Check and tighten belts and screws to prevent mechanical issues.

Additional Creality Filament System (CFS) units for multi-color printing.

Upgraded cooling fans for improved print quality.

Multi-color printing projects.High-speed prototyping.

FixMyPrint generates exact slicer settings for the Creality K2 - calibrated for your filament and slicer in seconds.