All Printers

CREALITY K1

direct driveEnclosedAuto-LevelKlipper
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality K1 technical specifications
Build Volume220x220x250mm
Bed TypeTextured PEI
Max Nozzle Temp300°C
Max Bed Temp100°C
Hotend Typeall_metal
Coolinghigh
Max Speed600 mm/s
Max Acceleration20000 mm/s²
Motion Systemenclosed_corexy
FirmwareKlipper
Nozzle Sizes0.4mm

Known Issues

warning

Layer Shifting

The machine may experience layer shifting when printing at high speeds.

Mitigation: Reduce printing speed or ensure belts are properly tensioned.

See the full fix guide →

Filament Compatibility

PLAexcellentPrints smoothly with minimal adjustments.
PETGgoodRequires fine-tuning for optimal results.
ABSfairMay warp due to lack of enclosure.
ASAfairSimilar issues to ABS; requires controlled environment.
TPUgoodWorks well due to direct drive extruder.
NylonpoorChallenging to print; requires high temperatures and enclosure.
PCpoorDifficult without enclosure due to high warping.

Maintenance Tips

Regularly check the tension of the belts.
Clean the nozzle after each print job.
Ensure the build plate is free from residue before printing.

Popular Upgrades

All-metal hotend for higher temperature capabilities.
Upgraded cooling fans for better print quality.
Auto bed leveling sensor enhancement.

Best For

PrototypingHobbyist projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality K1 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer