CREALITY ENDER 5

bowden longMarlin

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

warning

The printer may exhibit Z-axis wobble affecting print quality.

Mitigation: Tighten the Z-axis leadscrew and ensure all frame bolts are securely fastened.

info

Prints may not adhere well to the stock glass bed.

Mitigation: Use adhesion aids like glue stick or blue painter's tape.

PLAexcellentHandles PLA very well with minimal tuning.

PETGgoodCapable of printing PETG with some adjustments to cooling and retraction settings.

ABSfairMay struggle with warping due to lack of enclosure.

ASAfairSimilar issues as ABS with warping and temperature sensitivity.

TPUfairFlexible filament can be difficult to print with the bowden setup.

NylonpoorNylon can warp and requires high temperatures and enclosure.

PCpoorDifficult to print due to high temperature requirements and warping.

Regularly check and tighten all screws and bolts.

Lubricate the rods and bearings periodically to ensure smooth operation.

Keep the extruder and nozzle clean to avoid filament jams.

Auto bed leveling sensor for improved first layer consistency.

Direct drive extruder for better performance with flexible filaments.Amazon →

Upgraded cooling fans for more efficient heat dissipation.

Hobbyists requiring a larger print volume.Users looking for an affordable DIY printer with a sturdy frame.

FixMyPrint generates exact slicer settings for the Creality Ender 5 - calibrated for your filament and slicer in seconds.