All Printers

CREALITY ENDER 3 V3 SE

Direct DriveAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 V3 SE technical specifications
Build Volume220x220x250
Bed TypePC Spring Steel
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend TypePTFE-lined
CoolingDual Fan Cooling
Max Speed150 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Bed adhesion

Users may experience poor first layer adhesion.

Mitigation: Ensure bed is level and clean; use adhesive if necessary.

See the full fix guide →

Filament Compatibility

PLAexcellentWorks well with standard settings, good for beginners.
PETGgoodRequires minor adjustments to retraction settings.
ABSfairDifficult due to lack of enclosure; risk of warping.
ASAfairSimilar issues to ABS, watch for warping.
TPUgoodPossible with adjustments to print speed and retraction.
NylonpoorHigh temperatures required; risk of warping without enclosure.
PCpoorVery demanding on temperature consistency and adhesion.

Maintenance Tips

Regularly check the belt tension to ensure precision.
Clean the build plate after every print to maintain adhesion quality.
Lubricate the Z-axis screw regularly to prevent binding.

Popular Upgrades

Upgraded metal extruder
Dual Z-axis kit
Silent stepper motor drivers

Best For

Hobbyist projectsPrototyping with PLA

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V3 SE - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer