All Printers

CREALITY ENDER 3 V3 PLUS

Direct DriveAuto-LevelKlipper-based

Specifications

Build Volume
300x300x330
Bed Type
PEI Spring Steel
Max Nozzle Temp
300°C
Max Bed Temp
100°C
Cooling
Dual Fan Cooling
Max Speed
250 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed adhesion issues

Some users have reported difficulty in achieving proper bed adhesion.

Mitigation: Consider using glue stick or adjusting the bed temperature for better adhesion.

Filament Compatibility

PLAexcellentWorks well with default settings.
PETGgoodMay require adjustments in retraction settings.
ABSfairPrinting without an enclosure might result in warping.
ASAfairSimilar issues as ABS due to lack of enclosure.
TPUgoodDirect drive extruder aids in flexible filament printing.
NylonfairMoisture control is crucial and may need higher bed temps.
PCpoorStruggles due to high bed temperature requirements.

Maintenance Tips

Regularly check and tighten all screws and belts.
Clean the nozzle to prevent clogs.
Calibrate the bed frequently to ensure level prints.

Popular Upgrades

All-metal hotend for high-temperature filaments.
Dual Z-axis upgrade for stability.
BLTouch for improved auto-leveling.

Best For

DIY projectsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V3 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer