All Printers

CREALITY ENDER 3 V3 KE

direct driveAuto-LevelKlipper
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 V3 KE technical specifications
Build Volume220x220x240
Bed TypePEI Spring Steel
Max Nozzle Temp300°C
Max Bed Temp100°C
Hotend TypeAll-Metal
CoolingDual Fan Cooling
Max SpeedN/A
Max AccelerationN/A
Motion Systembedslinger
FirmwareKlipper
Nozzle Sizes0.4mm

Known Issues

info

Bed adhesion problems

Issues with print sticking to the bed.

Mitigation: Use a glue stick or hair spray for better adhesion, or adjust bed leveling.

See the full fix guide →
warning

Excessive stringing

Stringing between prints due to improper retraction settings.

Mitigation: Adjust retraction settings in slicing software and ensure that the nozzle temperature is correct.

See the full fix guide →

Filament Compatibility

PLAexcellentEasiest material to print on this machine.
PETGgoodMay require tuning of settings to prevent stringing.
ABSfairCan be difficult without an enclosure to control temperature.
ASAfairSimilar to ABS, challenges without enclosure.
TPUgoodFlexible material may require slower speeds.
NylonpoorRequires high temperature and controlled environment.
PCpoorHigh printing temperature; not recommended for open printers.

Maintenance Tips

Regularly clean and lubricate rods.
Check and tighten all screws periodically.
Inspect and clean nozzle regularly to prevent clogs.

Popular Upgrades

BLTouch for improved auto-leveling.
Upgraded springs for bed stability.
Dual Z axis for more uniform prints.

Best For

Hobbyist projectsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V3 KE - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer