All Printers

CREALITY ENDER 3 V3

Direct DriveAuto-LevelKlipper-based
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 V3 technical specifications
Build Volume220x220x250
Bed TypePEI Spring Steel
Max Nozzle Temp300°C
Max Bed Temp110°C
Hotend TypeAll-Metal
CoolingDual Fan Cooling
Max Speed180 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareKlipper-based
Nozzle Sizes0.4mm · 0.6mm · 0.8mm

Known Issues

warning

Bed Adhesion

Users may experience difficulty with print adhesion on the glass bed.

Mitigation: Use adhesives like glue stick or hairspray, or upgrade to a textured PEI sheet.

See the full fix guide →

Filament Compatibility

PLAexcellentPrints well with default settings.
PETGgoodEnsure proper bed adhesion, may need tuning of retraction settings.
ABSfairRequires enclosure to prevent warping.
ASAfairSimilar to ABS, benefits from an enclosure.
TPUfairFlexible filaments can be tricky due to bowden setup.
NylonpoorRequires very high temperatures and stable conditions.
PCpoorHigh temp and enclosure needed for optimal results.

Maintenance Tips

Regularly clean and lubricate the Z-axis lead screws.
Perform routine checks on belt tension and adjust as necessary.
Update firmware periodically to benefit from bug fixes and improvements.

Popular Upgrades

Direct drive conversion kitAmazon →
BLTouch auto-leveling sensor
All-metal hotend for higher temperature printing

Best For

hobbyist projectseducation and learning 3D printing basics

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V3 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer