All Printers

CREALITY ENDER 3 V2 NEO

bowden longAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 V2 Neo technical specifications
Build Volume220x220x250mm
Bed TypeGlass
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend Typeptfe_lined
Coolingstandard
Max Speed180 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Z-axis binding

The Z-axis can sometimes bind if not properly aligned.

Mitigation: Adjust the eccentric nuts on the Z-axis rollers for smooth movement.

Filament Compatibility

PLAexcellentWorks well with default settings.
PETGgoodRequires fine-tuning for best results.
ABSfairNeeds enclosure to prevent warping.
ASAfairSimilar challenges as ABS with warping.
TPUfairRequires slower print speeds due to bowden setup.
NylonpoorHigh temperatures needed; not ideal without enclosure.
PCpoorDifficult to print due to high temperature requirements.

Maintenance Tips

Regularly check and tighten all belts.
Ensure the print surface is clean before each print.
Lubricate the lead screw and bearings periodically.

Popular Upgrades

Metal extruder upgrade
All-metal hotend
Direct drive conversion kitAmazon →

Best For

Hobbyist projectsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V2 Neo - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer