All Printers

CREALITY ENDER 3 V2

bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 V2 technical specifications
Build Volume220x220x250mm
Bed TypeGlass
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend Typeptfe_lined
Coolingstandard
Max Speed180 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Bed adhesion

Poor initial layer adhesion on the glass bed

Mitigation: Use glue stick or hairspray to improve adhesion

See the full fix guide →
info

Noisy operation

Noisier than expected during operation

Mitigation: Upgrade stepper motor drivers to TMC2208 for quieter performance

Filament Compatibility

PLAexcellentEasy to print with standard settings
PETGgoodRequires careful temperature tuning for best results
ABSfairNeeds enclosure to prevent warping
ASAfairSimilar to ABS, often requires an enclosure
TPUfairChallenging due to bowden setup, slow print speeds recommended
NylonpoorDifficult due to temperature and humidity controls needed
PCpoorRequires high temperatures and enclosure

Maintenance Tips

Regularly check and tighten belts and screws
Clean print bed with isopropyl alcohol before printing
Lubricate Z-axis lead screw occasionally

Popular Upgrades

BLTouch or similar auto-leveling sensor
Direct drive extruder conversionAmazon →
All-metal hotend

Best For

Hobbyist projectsPrototypingEducation

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 V2 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer