All Printers

CREALITY ENDER 3 S1 PRO

direct driveAuto-LevelMarlin

Specifications

Build Volume
220x220x270mm
Bed Type
Textured PEI
Max Nozzle Temp
300°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

info

Cable Management

Loose cables may cause problems with moving parts.

Mitigation: Use cable ties to secure the cables properly.

warning

Bed Adhesion

Adhesion may sometimes be inconsistent with certain filaments.

Mitigation: Ensure bed leveling is correct and use appropriate adhesive aids like glue stick if required.

Filament Compatibility

PLAexcellentWorks well with stock settings.
PETGgoodMay require adjustments in cooling.
ABSfairLimited by lack of enclosure, warping may occur.
ASAfairSimilar to ABS, warping issues possible.
TPUgoodDirect drive extrusion allows flexible filament printing.
NylonfairHigher temperatures needed, enclosure recommended.
PCfairHigh temperatures required, ensure good bed adhesion.

Maintenance Tips

Regularly clean the print bed to maintain adhesion quality.
Inspect and clean the nozzle routinely to prevent clogs.
Lubricate the moving parts and check belt tension for optimal performance.

Popular Upgrades

BLTouch for enhanced leveling accuracy.
All-metal hotend for higher temperature materials.
Upgraded cooling fans for improved thermal management.

Best For

Beginners seeking a reliable starting point.Hobbyists who print a lot of PLA and PETG.

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 S1 Pro - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer