All Printers

CREALITY ENDER 3 S1 PLUS

Direct DriveAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 S1 Plus technical specifications
Build Volume300x300x300
Bed TypePC Spring Steel
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend TypePTFE-lined
CoolingDual Fan Cooling
Max Speed150 mm/s
Max Acceleration3000 mm/s²
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Bed adhesion issues

Some users report difficulty with bed adhesion on the Textured PEI surface with certain materials.

Mitigation: Use a brim or raft, and ensure bed leveling is properly calibrated.

See the full fix guide →

Filament Compatibility

PLAexcellentWorks well with default settings.
PETGgoodMay require increased bed temperature for better adhesion.
ABSfairOpen frame may lead to warping issues.
ASAfairSimilar to ABS, may warp in open environments.
TPUgoodDirect drive extruder handles flexible materials well.
NylonfairRequires high nozzle and bed temperatures, chamber preferred.
PCpoorDifficult to print due to high temperature requirements and open frame.

Maintenance Tips

Regularly clean the textured PEI bed with isopropyl alcohol.
Check and tighten all screws and belts periodically.
Lubricate the Z-axis lead screw for smooth operation.

Popular Upgrades

All-metal hotend for higher temperature materials.
Dual-Z upgrade for improved stability.
Enclosure for better thermal management.Amazon →

Best For

Hobbyist projectsPrototyping larger models

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 S1 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer