All Printers

CREALITY ENDER 3 PRO

bowdenMarlin

Specifications

Build Volume
220x220x250mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
180 mm/s
Max Acceleration
500 mm/s²
Nozzle Sizes
0.4mm

Known Issues

warning

Bed adhesion challenges

Users may experience poor bed adhesion with certain filaments.

Mitigation: Use a suitable adhesive or modify the bed temperature settings.

Filament Compatibility

PLAexcellentWorks well with minimal adjustments needed.
PETGgoodRequires careful temperature control for best results.
ABSfairMay require an enclosure for best performance.
ASAfairCan be printed but may warp without enclosure.
TPUfairFlexible filaments can be challenging due to bowden extruder.
NylonpoorDifficult to print due to high warping tendencies.
PCpoorRequires very high temperatures and good bed adhesion.

Maintenance Tips

Regularly check and tighten all screws and belts.
Clean the nozzle frequently to prevent clogs.
Ensure the bed is level before starting new prints.

Popular Upgrades

Glass bed for improved adhesion.
Direct drive conversion for flexible filament compatibility.
Auto bed leveling sensor for easier setup.

Best For

Hobbyist projectsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 Pro - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer