All Printers

CREALITY ENDER 3 NEO

bowden longAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 Neo technical specifications
Build Volume220x220x250mm
Bed TypeTextured PEI
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend Typeptfe_lined
Coolingstandard
Max Speed180 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

info

Bed adhesion issues

Some users report difficulty with prints adhering to the bed.

Mitigation: Ensure bed leveling is precise and consider using a glue stick or other adhesive.

See the full fix guide →

Filament Compatibility

PLAexcellentEasy to print, handles well on the textured bed.
PETGgoodMay require fine-tuning temperature settings.
ABSfairChallenging without enclosure due to warping.
ASAfairSimilar challenges to ABS, poor heat resistance without an enclosure.
TPUgoodRequires slowing down printing speed for flexibility.
NylonpoorDifficult to print due to high temperature requirements.
PCpoorRequires very high bed and nozzle temperatures.

Maintenance Tips

Regularly check and tighten all screws and belts.
Clean the nozzle to prevent clogs.
Calibrate the bed frequently to ensure optimal print quality.

Popular Upgrades

Upgraded springs for better bed stability
All-metal hotend for higher temperature printing
Dual Z-axis upgrade for improved stability

Best For

Hobbyist projectsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 Neo - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer