All Printers

CREALITY ENDER 3 MAX

bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 Max technical specifications
Build Volume300x300x340mm
Bed TypeGlass
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend Typeptfe_lined
Coolingstandard
Max SpeedN/A
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Bed adhesion issues

Difficulties with prints not sticking to the glass bed.

Mitigation: Use adhesive aids like glue stick or hair spray, or add a PEI sheet.

See the full fix guide →
info

Noisy operation

The printer can be relatively noisy during operation.

Mitigation: Upgrade to quieter stepper motor drivers (TMC2208/2209) to reduce noise.

Filament Compatibility

PLAexcellentWorks well with stock settings.
PETGgoodMay require higher bed temperature for best results.
ABSfairRequires enclosure to avoid warping issues.
ASAfairSimilar challenges to ABS without an enclosure.
TPUfairBowden setup can be tricky for flexible filaments.
NylonpoorHigh temperatures and enclosure needed, difficult on this setup.
PCpoorGenerally not recommended due to high temperature and enclosure requirements.

Maintenance Tips

Regularly clean and level the bed.
Ensure all screws and bolts are tight to avoid loose components.
Periodically check and clean the nozzle to prevent clogs.

Popular Upgrades

BLTouch for auto bed leveling
Direct drive conversion for flexible filamentsAmazon →
Upgraded silent stepper motor drivers

Best For

Hobbyist projectsLarger-scale printsEntry-level users looking for a large build volume

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 Max - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer