All Printers

CREALITY ENDER 3

bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality Ender 3 technical specifications
Build Volume220x220x250mm
Bed TypeGlass
Max Nozzle Temp255°C
Max Bed Temp110°C
Hotend Typeptfe_lined
Coolingstandard
Max SpeedN/A
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

warning

Uneven bed adhesion

The print bed may need regular leveling to ensure prints stick properly.

Mitigation: Manually level the bed before each print or install an auto bed-leveling sensor.

See the full fix guide →
info

Bowden tube issues

Filament may jam or retract poorly due to bowden tube setup.

Mitigation: Regularly clean the tube and consider upgrading to a Capricorn tube for smoother filament movement.

Filament Compatibility

PLAexcellentPerforms well at standard settings.
PETGgoodRequires proper tuning to avoid stringing.
ABSfairNeeds an enclosure to prevent warping due to temperature fluctuations.
ASAfairSimilar issues as ABS; requires enclosure.
TPUfairPrinting speed needs to be reduced for flexible filaments.
NylonpoorDifficult to print due to moisture sensitivity and high temperature requirements.
PCpoorHigh bed and nozzle temperature are challenging without an enclosure.

Maintenance Tips

Regularly check and tighten all screws and belts.
Clean the nozzle regularly to prevent clogs.
Maintain proper bed leveling for best adhesion.

Popular Upgrades

Auto bed-leveling sensor
All-metal hotend
Dual Z-axis upgrade

Best For

Hobbyist projectsEntry-level 3D printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality Ender 3 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer