CREALITY ENDER 2 PRO

bowden longMarlin

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

info

The Bowden tube may sometimes clog if the filament is not properly managed or if the nozzle is too cold.

Mitigation: Ensure the nozzle is heated properly before loading or unloading filament. Use filament guide to prevent tangling.

PLAexcellentWorks well with default settings and minimal adjustments.

PETGgoodRequires adjusting print temperatures and slower speeds for optimal results.

ABSfairPrinting ABS is challenging due to the lack of an enclosure; warping may occur.

ASAfairSimilar challenges as ABS, with possible warping issues.

TPUgoodCan be printed with adjustments to slow speed and reduced retraction.

NylonpoorDifficult without enclosure and requires high temps which may not be stable.

PCpoorHigh warping potential and needs very high nozzle temperatures, which are at the limit of this printer's capabilities.

Regularly check and tighten belts for optimal performance.

Clean the nozzle and bed after every few prints to prevent debris buildup.

Lubricate the Z-axis screw to prevent mechanical wear.

BLTouch for automatic bed leveling

Upgraded bed springs for better leveling stability

All-metal hotend for higher temperature printing capabilities

BeginnersHobbyists interested in small to medium prints

FixMyPrint generates exact slicer settings for the Creality Ender 2 Pro - calibrated for your filament and slicer in seconds.