CREALITY CR-10S
bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint
Specifications
| Build Volume | 300x300x400mm |
|---|---|
| Bed Type | Glass |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Hotend Type | ptfe_lined |
| Cooling | standard |
| Max Speed | 200 mm/s |
| Max Acceleration | N/A |
| Motion System | bedslinger |
| Firmware | Marlin |
| Nozzle Sizes | 0.4mm |
Known Issues
warning
Bed adhesion problems
Difficulty in getting prints to adhere to the glass bed
Mitigation: Use a bed adhesive or adjust initial layer settings
See the full fix guide → warning
Z-axis misalignment
Potential for Z-axis screw misalignment causing layer shifts
Mitigation: Regularly check and align the Z-axis lead screws
Filament Compatibility
Maintenance Tips
Regularly clean and lubricate lead screws
Check belt tension monthly to prevent layer shifting
Calibrate the extruder regularly for consistent extrusion
Popular Upgrades
Auto bed leveling sensor like BLTouch
Dual Z-axis upgrade for stability
All-metal hotend for higher temperature materials
Best For
Large format printingBeginners needing a reliable starting printer
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for the Creality CR-10S - calibrated for your filament and slicer in seconds.
Generate Settings for This Printer