All Printers

CREALITY CR-10 V3

bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality CR-10 V3 technical specifications
Build Volume300x300x400mm
Bed TypeGlass
Max Nozzle Temp260°C
Max Bed Temp100°C
Hotend Typeptfe_lined
Coolingstandard
Max Speed100 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

info

Assembly Required

The printer may require considerable assembly out of the box.

Mitigation: Allocate time for assembly and follow the manual carefully.

warning

Bed Adhesion

Some users experience first layer adhesion issues on the glass bed.

Mitigation: Use adhesive aids such as glue stick or painters tape.

See the full fix guide →

Filament Compatibility

PLAexcellentPrints PLA very well with standard settings.
PETGgoodMay require tweaking to prevent stringing.
ABSfairLacks enclosure, which can cause warping.
ASAfairSimilar to ABS, enclosure recommended.
TPUgoodDirect drive is beneficial for flexible filaments like TPU.
NylonfairHigh temperature and enclosure needed for optimal results.
PCpoorHigh temps and enclosure are generally needed, which this printer lacks.

Maintenance Tips

Regularly check and tighten all screws and belts.
Keep the build surface clean to avoid adhesion issues.
Lubricate the Z-axis screws to maintain smooth motion.

Popular Upgrades

BLTouch for automatic bed leveling
Better quality springs for the print bed
Upgrading to a silent mainboard

Best For

Large volume printsFlexible filament printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality CR-10 V3 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer