CREALITY CR-10 SMART PRO

bowden longAuto-LevelMarlin

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

warning

Some users report issues with maintaining a stable connection over Wi-Fi.

Mitigation: Use a wired connection for critical prints or update firmware to the latest version.

PLAexcellentWorks well with standard settings.

PETGgoodSlight adjustments may be needed for optimal adhesion.

ABSfairOpen frame may lead to warping; enclosure recommended.

ASAfairSimilar challenges as ABS with warping.

TPUgoodDirect drive system handles flexible filaments well.

NylonfairHigher temperatures required and may have adhesion issues.

PCpoorDifficult without an enclosure and often results in warping.

Regularly clean the glass bed with isopropyl alcohol.

Check and tighten all screws and belts monthly.

Lubricate all moving parts to ensure smooth operation.

Upgrade to a PEI-coated spring steel sheet for better adhesion.

Install a Raspberry Pi for running OctoPrint.Amazon →

Replace the stock fans with quieter, high-efficiency models.

Large-scale prototypingHobbyist projectsEducational settings

FixMyPrint generates exact slicer settings for the Creality CR-10 Smart Pro - calibrated for your filament and slicer in seconds.