All Printers

CREALITY CR-10 SMART

bowdenAuto-LevelMarlin

Specifications

Build Volume
300x300x400mm
Bed Type
Glass
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
N/A
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Wi-Fi connectivity issues

Users report intermittent connectivity issues with the Wi-Fi module.

Mitigation: Try updating the firmware or use a wired connection for reliable printing.

Filament Compatibility

PLAexcellentPrints well with standard PLA settings.
PETGgoodRequires careful tuning of retraction settings due to bowden setup.
ABSfairRequires enclosure for best results, especially with taller prints.
ASAfairSimilar considerations as with ABS; enclosure recommended.
TPUfairChallenging to print due to bowden setup, requires low printing speeds.
NylonpoorDifficult to print well without high bed and ambient temperatures.
PCpoorDemanding in terms of temperature stability and enclosure is beneficial.

Maintenance Tips

Regularly check and tighten all bolts and screws.
Ensure bed level calibration is performed frequently.
Clean the print bed and nozzle regularly to prevent adhesion issues.

Popular Upgrades

Dual Z-axis lead screw upgrade for improved stability.
BLTouch for enhanced auto bed leveling.
Upgraded cooling fans for better print detail.

Best For

Large format printingBudget-friendly large prints

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality CR-10 Smart - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer