All Printers

CREALITY CR-10 SE

Direct DriveAuto-LevelKlipper-based
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Creality CR-10 SE technical specifications
Build Volume220x220x265
Bed TypePEI Spring Steel
Max Nozzle Temp300°C
Max Bed Temp110°C
Hotend TypeAll-Metal
CoolingDual Fan Cooling
Max SpeedN/A
Max AccelerationN/A
Motion Systembedslinger
FirmwareKlipper-based
Nozzle Sizes0.4mm

Known Issues

info

Bowden tube wear

The Bowden tube can wear out over time, affecting filament feeding.

Mitigation: Regularly check and replace the Bowden tube.

warning

Glass bed adhesion

Some users experience poor bed adhesion on the glass surface.

Mitigation: Use adhesive aids such as glue stick or hair spray.

See the full fix guide →

Filament Compatibility

PLAexcellentStandard settings work well.
PETGgoodMay require glue stick for better adhesion.
ABSfairRequires enclosure to reduce warping.
ASAfairEnclosure recommended for best results.
TPUfairRequires slow speed and enhanced retraction settings.
NylonfairHigh temperatures needed; enclosure helps.
PCpoorDifficult without a heated enclosure.

Maintenance Tips

Regularly clean the build surface before each print.
Check and tighten all screws periodically to ensure frame stability.
Lubricate the Z-axis lead screw for smooth operation.

Popular Upgrades

BLTouch for improved auto-bed leveling
All-metal hotend for higher temperature printing
Silent stepper motor drivers for quieter operation

Best For

Large format printsPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Creality CR-10 SE - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer