CREALITY CR-10
bowden longMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint
Specifications
| Build Volume | 300x300x400mm |
|---|---|
| Bed Type | Glass |
| Max Nozzle Temp | 250°C |
| Max Bed Temp | 100°C |
| Hotend Type | ptfe_lined |
| Cooling | standard |
| Max Speed | 100 mm/s |
| Max Acceleration | N/A |
| Motion System | bedslinger |
| Firmware | Marlin |
| Nozzle Sizes | 0.4mm |
Known Issues
warning
Bed adhesion
Issues with prints not sticking to the bed
Mitigation: Use glue stick or hairspray on the glass bed to improve adhesion
See the full fix guide → info
Bowden tube clog
Filament can get stuck in the Bowden tube
Mitigation: Regularly clean and maintain the Bowden tube and check for blockages
See the full fix guide →Filament Compatibility
Maintenance Tips
Regularly tighten all frame screws to maintain stability
Clean the glass bed with isopropyl alcohol before prints
Periodically lubricate the z-axis lead screws
Popular Upgrades
Auto bed leveling sensor
All-metal hotend for higher temperature filaments
Upgrade to a silent motherboard
Best For
Large volume printsPLA and PETG models
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for the Creality CR-10 - calibrated for your filament and slicer in seconds.
Generate Settings for This Printer