All Printers

BAMBU LAB P2S

direct driveEnclosedAuto-LevelBambu

Specifications

Build Volume
256x256x256mm
Bed Type
Textured PEI
Max Nozzle Temp
300°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
600 mm/s
Max Acceleration
20000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

warning

Heat Buildup Causes Clogging

The shared fan system can lead to heat buildup, causing nozzle clogs during high-flow printing, especially with PETG/ASA filaments.

Mitigation: Printing with the door open or adding a riser can help, but these solutions may compromise the printer's silent design and print quality.

info

Nozzle Failure After Short Use

Some users have reported nozzle failures after approximately one week of use.

Mitigation: Replacing the nozzle with an aftermarket hotend may resolve the issue, though this is not officially approved by Bambu Lab.

Filament Compatibility

PLAexcellentStandard filament with optimal performance.
PETGgoodMay experience heat creep issues in high ambient temperatures.
ABSgoodRequires proper ventilation due to fumes.
ASAgoodSimilar to ABS with better UV resistance; may experience heat creep issues.
TPUexcellentFlexible filament prints well with direct drive extruder.
NylongoodRequires high nozzle temperatures and proper drying before use.
PCfairHigh-temperature filament; may require enclosure heating for optimal results.

Maintenance Tips

Regularly clean the nozzle to prevent clogs.
Ensure the build plate is free from debris for optimal adhesion.
Check and tighten belts periodically to maintain print accuracy.

Popular Upgrades

Aftermarket hardened steel nozzles for enhanced durability.
Additional build plates with different surfaces for varied adhesion properties.

Best For

Multi-material printing projects.High-speed prototyping with reliable quality.

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Bambu Lab P2S - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer