All Printers

BAMBU LAB P1S

direct driveEnclosedAuto-LevelBambu
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Bambu Lab P1S technical specifications
Build Volume256x256x256mm
Bed TypeTextured PEI
Max Nozzle Temp300°C
Max Bed Temp120°C
Hotend Typeall_metal
Coolingvery_high
Max Speed500 mm/s
Max Acceleration20000 mm/s²
Motion Systemenclosed_corexy
FirmwareBambu
Nozzle Sizes0.4mm · 0.6mm · 0.8mm

Known Issues

info

Noisy Fans

The printer's cooling fans can be quite loud.

Mitigation: Consider replacing with quieter aftermarket fans.

Filament Compatibility

PLAexcellentHandles PLA with very high precision and speed.
PETGexcellentPETG prints well with minimal stringing on high-speed settings.
ABSgoodMay require an enclosure for best results due to warping issues.
ASAgoodSimilar to ABS; proper ventilation recommended.
TPUgoodWorks well but may require lowering print speed for flexible materials.
NylonfairHumidity control necessary; better results with high-temperature setup.
PCfairHigh nozzle temperature capability useful but needs enclosure to reduce warping.

Maintenance Tips

Regularly clean the print bed with isopropyl alcohol to ensure good adhesion.
Check and tighten belts periodically to maintain precision.
Keep the direct drive extruder clean and free of filament debris.

Popular Upgrades

Quieter fan replacements
External filament spool holder
Upgraded nozzle for wear resistance

Best For

High-speed prototypingDetailed miniature models

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Bambu Lab P1S - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer