All Printers

BAMBU LAB P1P

direct driveAuto-LevelBambu
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Bambu Lab P1P technical specifications
Build Volume256x256x256mm
Bed TypeTextured PEI
Max Nozzle Temp300°C
Max Bed Temp100°C
Hotend Typeall_metal
Coolinghigh
Max Speed500 mm/s
Max Acceleration10000 mm/s²
Motion Systemcorexy
FirmwareBambu
Nozzle Sizes0.4mm · 0.6mm · 0.8mm

Known Issues

warning

Nozzle Clogs

Clogs can occur when using filament types with specific additives.

Mitigation: Regularly clean the nozzle and use well-dry filament.

See the full fix guide →
info

Bed Adhesion

Adhesion issues may occur with some filament types.

Mitigation: Use a glue stick or hairspray to improve bed adhesion.

See the full fix guide →

Filament Compatibility

PLAexcellentWorks very well with default settings.
PETGgoodMay require adjustments for bed adhesion.
ABSfairEnclosure recommended to prevent warping.
ASAgoodPrints well but benefits from an enclosure.
TPUgoodDirect drive extruder handles TPU flexibles well.
NylonfairRequires controlled environment for best results.
PCfairHigh bed and nozzle temperatures required.

Maintenance Tips

Regularly clean the print bed to maintain adhesion.
Check and tighten belts to avoid layer shifting.
Lubricate moving parts to ensure smooth operation.

Popular Upgrades

Enclosure kit for temperature-sensitive materialsAmazon →
Hardened steel nozzle for abrasive filamentsAmazon →
Improved cooling fan for better overhang management

Best For

Rapid prototypingDetailed modelsFlexible filament printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Bambu Lab P1P - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer