BAMBU LAB H2D

Dual Direct DriveEnclosedAuto-LevelBambu

Specifications

Bambu Lab H2D technical specifications
Build Volume	350x320x325
Bed Type	PEI Spring Steel
Max Nozzle Temp	350°C
Max Bed Temp	120°C
Hotend Type	All-Metal
Cooling	Auxiliary Fan + Chamber Fan + Part Cooling Fan
Max Speed	600 mm/s
Max Acceleration	20000 mm/s²
Motion System	enclosed_corexy
Firmware	Bambu
Nozzle Sizes	0.2mm · 0.4mm · 0.6mm · 0.8mm

warning

Early units may have a misaligned rear Z-axis lead screw, causing loud noises and calibration failures.

Mitigation: Contact Bambu Lab support for assistance; later production batches have resolved this issue.

info

Some users reported the left print head not functioning due to an end-stop issue.

Mitigation: Replacing the filament buffer resolved the problem; consult Bambu Lab support for guidance.

PLAexcellentStandard settings yield high-quality prints.

PETGexcellentHandles PETG well with minimal stringing.

ABSexcellentEnclosure and high bed temperature prevent warping.

ASAexcellentSuitable for outdoor applications; enclosure maintains temperature stability.

TPUgoodDirect drive extruder allows flexible filament printing; may require speed adjustments.

NylonexcellentHigh nozzle temperature supports nylon printing; enclosure reduces moisture absorption.

PCexcellentHigh-temperature capabilities enable polycarbonate printing with strong layer adhesion.

Regularly clean the nozzle to prevent clogs.

Lubricate the Z-axis lead screws monthly.

Check and tighten belts periodically to maintain print accuracy.

Laser Upgrade Kit for engraving and cutting capabilities.

Additional AMS units for multi-material printing.

High-speed prototypingMulti-material and multi-color prints

FixMyPrint generates exact slicer settings for the Bambu Lab H2D - calibrated for your filament and slicer in seconds.