All Printers

BAMBU LAB A1 COMBO

direct driveAuto-LevelBambu

Specifications

Build Volume
256x256x256mm
Bed Type
Textured PEI
Max Nozzle Temp
300°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
500 mm/s
Max Acceleration
10000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

warning

Heatbed Cable Recall

The heatbed cable can short-circuit and pose electric shock and fire hazards.

Mitigation: Bambu Lab has issued a recall and offers replacement parts.

warning

Power Board Overheating

The AC power distribution board may overheat, potentially causing damage.

Mitigation: Bambu Lab redesigned the power board and replaced or repaired affected units.

Filament Compatibility

PLAexcellentOptimal performance with standard settings.
PETGgoodRequires slight adjustments for optimal adhesion.
ABSfairLack of enclosure may lead to warping.
ASAfairSimilar to ABS; enclosure recommended.
TPUgoodFlexible filament printing is supported.
NylonpoorHigh temperatures and enclosure needed.
PCpoorRequires high temperatures and enclosure.

Maintenance Tips

Regularly inspect and replace the heatbed cable if signs of wear are present.
Keep the print bed clean to ensure proper adhesion.
Update firmware periodically to benefit from improvements and fixes.

Popular Upgrades

Enclosure kit to improve print quality with temperature-sensitive materials.
Additional AMS Lite units for expanded multi-color printing capabilities.

Best For

Multi-color printing projectsHigh-speed prototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Bambu Lab A1 Combo - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer