ARTILLERY SIDEWINDER X4 PRO

Direct DriveAuto-LevelKlipper-based

Specifications

warning

Users have reported difficulties with prints adhering to the glass bed, especially with certain filaments.

Mitigation: Use a glue stick or hairspray to improve adhesion, or consider a PEI sheet upgrade.

info

The printer can be relatively noisy during operation compared to others.

Mitigation: Consider adding dampers to the stepper motors or placing the printer on a vibration-dampening pad.

PLAexcellentPrints very well with minimal adjustments needed.

PETGgoodRequires slight adjustments in settings for optimal results.

ABSfairOpen frame can lead to warping; enclosure recommended.

ASAfairSimilar to ABS, better results with an enclosure.

TPUgoodDirect drive extruder handles flexible filaments well.

NylonfairHigh temperatures required; may need an enclosure for best results.

PCpoorHigh warping without an enclosure; not recommended without modifications.

Regularly check and tighten all screws and belts.

Lubricate the Z-axis lead screws periodically.

Clean the nozzle and bed surface after every few prints.

PEI spring steel sheet for better adhesion.

Silent stepper motor drivers for reduced noise.

Upgraded cooling fans for improved print quality.

Large format printingBudget-friendly prototyping

FixMyPrint generates exact slicer settings for the Artillery Sidewinder X4 Pro - calibrated for your filament and slicer in seconds.