All Printers

ARTILLERY SIDEWINDER X3 PLUS

direct driveAuto-LevelMarlin

Specifications

Build Volume
300x300x400mm
Bed Type
Glass
Max Nozzle Temp
260°C
Max Bed Temp
130°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed Adhesion Issues

Initial prints might have adhesion problems on the glass bed.

Mitigation: Use glue stick or hairspray to improve adhesion.

info

Noisy Fan

Fans might generate noticeable noise during operation.

Mitigation: Consider replacing with quieter fans.

Filament Compatibility

PLAexcellentEasiest material to use with this printer.
PETGgoodRequires fine-tuning of temperatures.
ABSfairRequires enclosure for best results.
ASAfairSimilar to ABS issues; enclosure recommended.
TPUgoodWorks well with direct drive extruder.
NylonpoorDifficult without a heated enclosure.
PCpoorHigh temperatures needed; enclosure required.

Maintenance Tips

Regularly check bed leveling for consistent print quality.
Lubricate Z-axis screws periodically to ensure smooth operation.
Clean the print bed after every few prints to maintain adhesion.

Popular Upgrades

Flexible magnetic bed for easier print removal
Silent stepper drivers to reduce operational noise
Upgraded hotend for higher temperature materials

Best For

PrototypingHobbyist projects

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Artillery Sidewinder X3 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer